Wednesday 18th of October 2017

logo
English (United Kingdom)简体中文(中国)Español(Spanish Formal International)French (Fr)Deutsch (DE-CH-AT)Russian (CIS)Japanese(JP)Português (Brasil)Arabic (العربية الموحدة)

solar shingle

solar shingle solar roof

BOMSOLAR Solar photovoltaic shingle solar roof is a specially formulated shingle using a high strength ceramic material and photovoltaic module encapsulated by ceramic tile sealant, so that to generate electricity. It can not only be used as roofing construction materials, but also has the function of a conventional solar cell power generation module. Utilize visible light of the sun's rays to produce electricity by the photovoltaic effects of silicon cells.

solar shingle solar tile PV roof

Its advantages are:

Good insulation effect for the building

Photovoltaic ceramic shingles invert about 20% of solar energy into electricity, reducing the amount of heat build-up on the roof. Because there is a greater cooling space below photovoltaic ceramic shingles, keeping up with the flow of outdoor air, will not cause a sharp rise in room temperature. Compared with ordinary tile roof, it has better insulation effect.

 

Strong anti-leakage performance

Photovoltaic ceramic shingle has the general properties of ordinary ceramic shingle, and because its high density is high, the seepage rate only equal to one of a dozen of only ordinary shingle. Only 0.1 %, so the water will not penetrate the roof shingle/tile or go inside. Thus it’s good anti-seepage leakage characteristics.

Integrated energy generation bulding

The power generation of our solar shingles is around 70W/SM, usually 9pcs combine to 1 SM. For example, on 100 square meters building roofs, the south-facing 50m2 can generate 3500W, it’s enough to meet ordinary family’s requirement of electricity consumption of household appliances. Can meet the basic electricity needs of an ordinary construction.

High strength , long life

The mechanical loads strength resistance of our solar shingles /PV tile is greater than 3000N, much higher than ordinary tiles’ 1200N. And because of its very low leakage rate, good resistance to rain, fog, ice, snow etc, it has long life, up to 100 years. Compared to ordinary tiles, it has absolute superiority on maintenance costs; for customers, the high-strength of PV ceramic shingle/tile making a significant advantages of low loss in the transportation, installation etc.

Building’s integrated incremental cost is low

Compared with ordinary roof installed solar modules, you need a steel frame support, and do water treatment, but our photovoltaic roof shingles/tiles can be used directly as a building material, thus saving costs of construction materials , brackets and water treatment. Not counting other materials of solar system, only on building integrated installation can achieve cost savings of about 20%.

Aesthetics of the building will not be affected

You can achieve a consistent look across the roof. No color difference. so keep the original appearance of the building design, because our solar photovoltaic power generation ceramic shingle/tile with no color difference appearance, smooth, uniform internal and external material, so that the whole roof tiles maintain the traditional architectural style, the consistency of front and rear roof heigh, increase the visual beauty of the building.

Easy installation

For new buildings, our solar photovoltaic shingles can be installed as common tiles, only increase a simple cable connection, simple construction, reduce the construction period.

 

Specifications

Model No

BS-RF001

BS-RF002

BS-RF003

BS-RF004

Electrical properties

Peak power P (M)(W)

8

8

8

8

Power deviation (W)

±3%

±3%

±3%

±3%

Open circuit voltage  Voc(V)

1.234

1.234

4.82

3.7

Short-circuit current  Isc(A)

8.309

8.309

5.47

8.53

Optimum operating voltage  Vm(V)

1.042

1.042

4.016

3.7

Optimum operating current  Im(A)

7.78

7.78

5.52

7.9

Cell Efficiency
(%)

17%

17%

17%

17.75%

Mechanical properties

Cable

2.5mm2 ,350mm

2,5mm2 ,350mm

2.5mm2 ,450mm

2.5mm2, 450mm

Cell arrangement

2

2

8

6

Cell size (mm)

156*156

156*156

125*125

156*156

Product size (mm)

440*330*45

440*330*45

665*420*30

642*437*25

Product weight

3.2

3.2

6.5

5.2

Border material

Ceramic Composites

Tempered glass

High brightness, stainless steel,thickness 3.2mm

Compressive strength

>3000N

 



Copyright © Zhuhai Bomin Solar Technology Co., Ltd. 2010

Address: No.6 Chuangye Dong Rd., Lian Gang Industrial Zone, Jinwan District

Zhuhai 519090, Guangdong province, P.R.C. Tel: +86-756-7686663 5208978 Fax: +86-756-7616658 Email: info@bomsolar.com Skype: BOMSOLAR